For a large-scale intensive pig farm, each worker has to walk 2.5 kilometers on each normal working day, spend at least 30% of the time dealing with the pigs, and rush to the pigs.
Many pig houses are now designed to be precise and reasonable, including gates, partitions, partitions, etc. However, once the gates are opened for pigs, a small pig board is not wide enough to stop the aisles. It is difficult to put 10 -20 pigs with a body weight of 100 kg successfully transitioned. The pigs kept in the same column have been together for a long time, familiar with each other and feel safe. For them, the bar and the barker mean the entire world. At the time of the listing, it was difficult for them to suddenly go out of the hurdles and pass through strange corridors and turning corners until they got out of the pigshed. The imperfections of the pig-raising facilities will directly lead to the madness of the breeder and the abuse of the pigs. Here are some ways to catch a pig correctly:
1 Do not give the pigs that have been rushed the choice of direction;
2 When catching pigs, always use a 1-meter-wide aisle to drive the pigs' board, and construct a solid wall on both sides;
4 If one person rushes, only a small amount of pigs will be rushed each time, 3-5 heads;
5Before the pigs have to do preparations, such as column doors, bezels, etc.:
6 Do not try to catch the pig over some obstacles, such as wetlands, sunlight belts, frozen areas;
7 Design should be as correct and reasonable as possible, such as boar breeding area, sow breeding area, selection of pigs, and catching pigs.
Damage to the breeding area is a very important part because the entire production starts here. First of all, it is necessary to increase the pig-raising efficiency in the breeding area so that the breeders can concentrate their time and energy on breeding instead of wasting time to drive the sows. In order to better control the flow of pigs, the width of the aisles must be the same, the gates should be set on both sides of the switch, and the four corners of the limit column should be classified by the chain of pigs. This is a nerve-wracking task for everyone. In fact, especially when only half of the pigs in the column are to be driven out, or only part of the pigs are to be driven out, they have to have two talents, one standing in front of the bar, controlling the opening of the door, and the other picking up the pigs' board, each catching a slaughter. Before the pigs are rushed, they must mark the pigs that are driven out.
When all pigs are driven out of a small field, they can be driven by a manipulative pig with a large area of ​​pigshed. It is more difficult to catch pigs in large hurdles. Take care not to leave one or two pigs at the end, otherwise it is almost impossible to drive them to the corridor.
Of course, the best way to catch pigs and classify them is to have a middle office. And it is very easy for pigs to show off all the breeding houses. This includes a temporary transfer swish, runway, plus floor scale and observation column, and separate doors leading to different columns so that a group of pigs can be divided into different groups at once. Types of.
The pigs should be at least 100 meters away from the shed. It is best to have a transit bar so that the pigs can be brought here earlier before the pigs arrive. Even if the pigs are loaded, they will not be able to come back. Go straight back to the bar.
The Anomatic series of high-quality deep drawn Aluminum Canisters is designed to be compatible with your chosen valves, Actuators and drug formulations. Our deep drawing process ensures a consistent side wall thickness using high strength aluminum which is far superior to other forming methods. The aluminum is work hardened during the deep draw process and the surface mechanically polished providing a smooth, hard internal finish suitable for use with both CFC and HFA propellants.
Custom or Standard we are here to serve you
Our standard canister sizes are 10ml, 14ml and 19ml, with customized sizes available. Our canisters are also available in anodized and plasma coated finishes.
Why Anomatic
Headquartered in New Albany, Ohio (USA), Anomatic is the world`s leading supplier of anodized aluminum solutions and offers:
· U.S. and Asia based manufacturing
· State-of-the-art facilities
· Unmatched capacity at 2.5 billion units annually
· cGMP compliant and ISO14001 and ISO9001 certified
· Advanced surface treatment options
· Unrivaled lead times
Aluminum anodization is an electrochemical process that enhances the strength, durability, and appearance of aluminum. When aluminum is oxidized, super-strong oxide (anodic) layers [grow" on the surface of the metal. These new layers are highly resistant to wear and corrosion.
The exacting part to part consistency achieved with our unique anodizing system cannot be obtained with conventional hoist line systems. Conventional anodizing systems present parts with varied coating thicknesses and voids formed due to air pocketing.
A consistent uniform 6 µm anodic film thicknesses will protect certain drug formulations and the canister from degradation. Heavier film thicknesses of up to 12µm can be provided to meet your more demanding application.
Dry powder inhaler manufacturing process,MDI Canister,Aluminum Canister for MDI
Anomatic(suzhou)metal packaging co,ltd , https://www.anomaticpharma.com