Water-proof incubator use method


1. Water-proof incubator conditions:
Ambient temperature: 10-30 ° C;
No strong light, no corrosive gas, good ventilation, relative humidity below 85%;
Use power: ~200V ± 10%, 50HZ. The power capacity is not less than 1KW, and the grounding power socket is provided;
2. How to use the water-proof incubator:
Turn on the power: Insert the three-pin plug into the power socket and set the power switch on the panel to the “on” position. At this time, the meter displays a digital display indicating that the device is in working condition.
Set the setting-measurement switch to the setting, adjust the thermostat knob or touch key, and observe the digital thermometer indication as the desired set temperature value. When the setting-measurement switch is placed in the measurement, the device enters the working state of automatic temperature control. The three indicators of heating, cooling and protection alternately indicate the working state of the device.
Illumination light switch, when the illumination needs to be set to "on" position, when the mold incubator is sterilized, turn on the germicidal light switch.
Intelligent and special requirements are subject to additional instructions.

Orthopedic Surgery Accessories

Spine Frame,Spine Surgery Support,Spine Surgery Frame,Surgery Knee Knife Holder

NINGBO TECHART MEDICAL EQUIPMENT CO.,LTD , https://www.techartmed.com