The following points should be noted in the maintenance and storage of subsoilers:
1. Replace gear oil, check gear wear, and adjust or replace if necessary.
2, check the oil seals and gaskets are effective.
3, check the bearing wear, adjust or replace if necessary.
4, check the fasteners, tools and other parts of the rust wear and deal with accordingly.
5, check the chain transmission parts and the wear of the moving parts, if necessary, adjust or replace.
6. Clean the machine in time, and apply anti-rust protection to the deep spatula, shovel tip, spade blade and each fastening bolt.
7. When the machine tool is not used for a long time, it should be stored in a ventilated and dry place. Sprockets, chains and other exposed parts should be coated with anti-rust oil. When there is no hangar condition, the place with higher ground should be selected, and the deep loosening machine should be lifted with bricks or wood blocks, so that the cutting edge is about 10 centimeters away from the ground and covered with a tarpaulin. It is forbidden to open the machine for a long time in the open air.
Ip Video Intercom,Ip Intercom System,Ip Video Intercom System,Ip Door Entry System
Zhuhai Mingke Electronics Technology Co., Ltd , https://www.mingke-tech.com