Tips for using all stainless steel transfer windows

Tips for using all stainless steel transfer windows

All stainless steel transfer windows are widely used in micro-technologies, biological laboratories, pharmaceutical plants, hospitals, food processing industries, LCDs, electronics factories and other places where air purification is required. As an auxiliary equipment for the clean room, the method of use must be correct. Below, we will introduce the tips for using the all-stainless steel transfer window:
1. When the materials in the clean area are delivered, the materials should be transported to the relevant material intermediate station and removed from the clean area according to the reverse procedure when the materials enter.
2. All semi-finished products are transported from the clean area and are sent from the transfer window to the external temporary storage room and transported to the outer packaging room through the logistics channel.
3. Materials and wastes that are highly susceptible to pollution should be transported from their dedicated transfer windows to non-clean areas.
4. After the material enters and exits, the site and the safety of the transfer window should be cleaned in time, and the inner and outer access doors of the transfer window should be closed to clean and disinfect.
5. The materials entering and leaving the clean area must be strictly separated from the flow channel and accessed by the material channel of the production workshop.
6. When the materials enter, the original auxiliary materials are unpacked or cleaned by the person in charge of the preparation process, and then sent to the temporary storage room of the workshop through the transfer window; after the inner packaging materials are removed from the outer packaging, It is sent to the inner bag through the transfer window. The workshop integrator handles the material handover with the person in charge of the preparation and internal packaging process.
7. When passing through the transfer window, the rules for “opening and closing” the inner and outer doors of the transfer window must be strictly enforced, and the two doors cannot be opened at the same time. After opening the outer door, put the material into the door, then close the door, then open the inner door to take out the material, close the door, and so on.
   

Antibacterial Ingredients

Antibacterial Ingredients,Salicin Extract,White Willow Bark Extract,White Willow Bark Extract Salicin

Shaanxi Changsheng Industrial Co., Ltd. , https://www.cncsbio.com