The current key "three preventions" of shed dishes

1. Windproof production In early spring, greenhouse vegetables are mostly used for warming with greenhouse film to provide suitable temperature for vegetable growth. Therefore, it is very important to do a good job of windproof and protect the shed film and frame. Especially in the windy weather with high wind level, if the shed film is not fastened firmly, it will often be torn by the high wind, causing the whole shed to suffer. For this reason, pay attention to the weather forecast. Before the onset of strong winds, fix the scaffold, tighten the film line, check whether the film is damaged, find problems, and take targeted preventive measures as soon as possible.

2. Antifreeze The temperature in spring is the most unstable, which can easily cause frost damage. In March and April of each year, there will often be cold weather such as early spring. If the antifreeze measures are not in place, it may cause the vegetables to suffer freezing damage and even destroy the stubble. For this reason, it is necessary to pay close attention to the insulation of the shed before cooling down, such as controlling the amount of watering, sealing the shed film, and covering it with grass thatch or shed film to increase the temperature.

3. Disease prevention In early spring, the weather is volatile and the temperature fluctuates sharply, which often causes the occurrence and spread of vegetable diseases in the shed. Such as cucumber downy mildew, eggplant gray mold, spinach downy mildew, leek gray mold, tomato blight, etc. may occur at any time. For the above diseases, a combination of agricultural, physical, chemical and other prevention and control measures must be adopted. The temperature and humidity should be adjusted to the range suitable for the normal growth of vegetables. Fertilizer and water management should be strengthened, and plant regulators such as Bihu should be sprayed to enhance the freeze resistance and disease resistance of vegetable plants and minimize the occurrence of diseases.

Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone

Orthopedic Power Tool


Orthopedic electric drill saw system is suitable for trauma surgery.

our company mainly has Multifunctional Orthopedic Power Tool System, electric drill,cannulated drill, High Torgue Acetabular Reamer Drill,Oscillating Saw,Craniotomy Drill, Reciprocating Saw,Sternum Saw,Plaster Saw,and so on.

As a medical instrument used in hospital surgery, medical oscillating saw has the characteristics of beautiful appearance, small size, light weight, no wire, easy to carry, safe operation and can shorten the operation time.

Attention
1.Medical Power Tool is a short-time operation product, each use time of 10 minutes, can not be used continuously for a long time.
2.The battery is strictly prohibited high temperature, high pressure disinfection, after the operation should be taken out of the battery from the medical bone drill, into the packaging box, if not used for a long time, should not be charged and discharged once, so as to avoid plate aging.
3.The charger power cord can not receive oil, chemical solution erosion and mechanical damage.
4.Master the function of the device and the correct installation and use of the method, pay attention to maintenance, only properly maintained, in order to extend the service life, so that expensive medical equipment to use longer.



Orthopedic Power Tool,Electric Spine Drill,Medical Power Tool,Orthopedic Power Tools

Jiangsu Aomed Ortho Medical Technology Co.,Ltd , https://www.aomedortho.com