1, auxin buds: spray or dip method before the bud formation, spraying 25 microliters / litre citric acid, 10 microliter / liter triacontanol, 20 microliter / litre The mycinomycin solution, 20 μl/l indole acetic acid, and 2010-6 naphthalene acetic acid all have the effect of promoting differentiation of fruiting bodies of mushrooms and early fruiting.
2. Injecting nutrient solution to provoke buds: Suitable for the cultivation of common mushrooms and mushroom buds in the late period of cultivation or in the first time. The autumn and winter mushrooms and mushrooms are used with caution. Selection of Japanese-made "Mushroom", "Mushroom Sensitive", domestic "promotion", "Fugu Peptide," "Mushroom nutrient additives," and other prolactin liquid agent. First, according to the product specification to prepare nutrient solution, use a syringe type water injector to inject mushrooms, according to the method of water injection, management, in the spring to more ventilation, using dry and bacterium management. The first tidal mushroom does not produce a good mushroom. The first step is to vent the hole or cut off a piece of sclerotin which is 3 cm square, to promote the volatilization of the mushroom. The weight of each mushroom is controlled at 1.2-1.3 kg, and then 0.4-0.5 kg is injected. The prolactin solution was used for budding. Moisturizing and keeping warm in winter.
3, water injection Leilei: suitable for low water content of mushroom wood and mushroom after the fully cultivated mushroom wood buds. The temperature of water used for water injection must be 5°C lower than the temperature of mushroom wood. In winter when the temperature is low, the thick water of the mushrooms should be caught on the first day of the arrival of the warm current. The mushrooms should be stacked and covered with a film, and the sun should be filled with water for several hours until the temperature reaches 20°C-25°C. The amount of water injection should be 80%-85% of the weight of the original bacteria bar.
4, beat the buds: Some varieties have the characteristics of mushroom sprouts easily stimulated by vibration, such as 939 strains, can be used this method Lei. If the 939 strain is still not mushrooming at the beginning of the mushrooming period, it can be picked up in one hand. The shooter can use the puncture device to shoot the mushroom wood in a shocked wood way, or the two bags of mushroom wood can be picked up and touched, and the relative humidity of the air can be maintained. 80%-85%, the temperature is controlled at 8°C-21°C. When the temperature exceeds 20°C, it is suitable for ventilation, so management for 4-8 days can produce mushroom buds.
Although there are a variety of methods for propelling buds, different types of mushroom species and mushroom species in different situations should select the appropriate budding method, otherwise the effect would be counter-productive.
Membrane thickening, processing is quite difficult, in addition to the above-mentioned special methods to promote the formation of mushroom buds, the future should pay attention to do preventive work, such as timely bagging, selected season, formulated according to the requirements of the preparation, after the recovery of mycelial surface mycelium Ventilation and ventilation are used to promote its lodging, so as to reduce the phenomenon that the pellicles are thick and hard and difficult to produce.
Second-Hand Rapier Loom,Air Jet Loom,Water Jet Loom,Electronic Jacquard Machine,Second-Hand Weaving Machine,Textile Machinery
Changzhou Satidi Import and Export Co., Ltd. , https://www.guanjiejt.com