The soil peanuts are selected to be drought-tolerant and resistant to inferiority, and prefer sandy loam with good permeability and large temperature difference between day and night. Plots of peanuts and legumes that have not been planted should be selected, and crops such as green onion, corn bran, and vegetable bran should be selected.
Choosing the superior seed covering the mulch film can increase the soil temperature, enhance the ability to protect the mites, and improve the fertilizer utilization rate. In order to improve the planting efficiency, the film-mulching cultivation should choose the varieties of large and medium-sized fruit types with higher yield potential, higher yield and strong disease resistance.
There are two kinds of misunderstandings in the timely planting and production: one is the early sowing period, because the temperature in the early spring is not stable, it will cause the lack of seedlings and ridges, which will lead to serious defamation. The other is to delay the sowing date, because the effect of mulching film can not be fully exerted, and the listing period is postponed accordingly, which will affect the income. Tests have shown that the sowing date of the film spring peanuts is generally about 10 days earlier than the open spring peanuts, and April 15-20 is appropriate.
The density of spring peanuts suitable for density film should not be too small or too large, and the small size will affect the yield. The rate of excessive single plant will decrease, the seeds will be wasted, and the yield will be reduced. In production, a double-row cultivation mode is usually used. The line spacing is 30 cm, the plant spacing is 15-18 cm, the mu density is about 10,000 points, two holes per hole, and the seed amount is about 17 kg.
Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone
Industrial 100Hz LiDAR Solutions
Industrial Laser Distance Sensor of the IT02S & IT03M series are designed for measurements of moving targets. The LiDAR distance sensor is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 3 centimeters and as far as 15 meters! The LiDAR laser sensor is widely used in many innovative applications on the market, including smart dustbin, unmanned supermarket etc.long distance control system.
Application areas of the sensor are:
> Harsh environments, like outdoors in strong sunlight
> Black surface can be up to 8m
> UAV/Drone Systems
> Intelligent Parking
> Smart Measure Systems
> Intelligent toilet
Industrial Lidar Sensor,Tof Laser Measurement Module,Tof Sensors,Time Of Flight Distance Sensor
Chengdu JRT Meter Technology Co., Ltd , http://www.accuracysensor.com