Switch leaks. The wear of the switch gasket or the wear of the switch asbestos wire will cause the switch to leak. Replace the new gasket or asbestos thread. The sprayer has not been used for a long time. The switch will be rusted by the liquid and cause the switch to rotate inflexibly. The switch can be removed and placed in kerosene for cleaning. Erasing rust marks, applying proper amount of lubricant, and tightening the switch cap.
The air chamber does not feed air, and the rocker can't press it. It is caused by shrinkage or cracking of the bowl or loosening of the nut on the bottom of the bowl. The skin should be slightly opened or replaced with a new skin, immersed in animal oil, lubricated and put on, coated with a little oil, and tighten the bottom nut.
Poor fog, fog does not become a cone. It may be caused by the nozzles' clogging of the nozzles, the clogging of the strainer in the casing, or the ingress and egress of the water ball valve causing the dirt to be contaminated. Should clear the nozzle holes to remove debris; if the casing plug should be disassembled and cleaned the filter, check the ball valve, remove dirt.
The rod in the air chamber rises automatically and the top of the gland covers the water. It is due to cracks in the gas wall or the bottom of the gas chamber, or the glass balls in the valve housing are clogged with debris, and cannot be caused by close contact with the valve body or damage to the skin. Repair tin cracks, remove body debris, and replace the skin. Air chamber cover leak or air cover leak. The reason is that the skin gasket is damaged or the flange is detached from the air chamber. Should replace the washer or solder off.
The air chamber does not feed air, and the rocker can't press it. It is caused by shrinkage or cracking of the bowl or loosening of the nut on the bottom of the bowl. The skin should be slightly opened or replaced with a new skin, immersed in animal oil, lubricated and put on, coated with a little oil, and tighten the bottom nut.
Poor fog, fog does not become a cone. It may be caused by the nozzles' clogging of the nozzles, the clogging of the strainer in the casing, or the ingress and egress of the water ball valve causing the dirt to be contaminated. Should clear the nozzle holes to remove debris; if the casing plug should be disassembled and cleaned the filter, check the ball valve, remove dirt.
The rod in the air chamber rises automatically and the top of the gland covers the water. It is due to cracks in the gas wall or the bottom of the gas chamber, or the glass balls in the valve housing are clogged with debris, and cannot be caused by close contact with the valve body or damage to the skin. Repair tin cracks, remove body debris, and replace the skin. Air chamber cover leak or air cover leak. The reason is that the skin gasket is damaged or the flange is detached from the air chamber. Should replace the washer or solder off.
Stainless Steel Cleanroom Sink
Cleanroom Sink,Cleanroom Wash Sink,Cleanroom Alkalization Sink, 304 Stainless Steel Wash Sink
AUSTAR Goup , https://www.hansencleanroom.com