Cultivated flat mushroom material scraping bacteria can increase production

Pleurotus ostreatus after harvesting two crops, the material surface tends to appear severe dry compaction, poor permeability, poor permeability, hyphal senility and other undesirable phenomena, thus delaying the mushrooming time, reduce the yield of mushroom, or even mushroom. The surface scraping bacteria can better solve this problem and have a good effect of increasing production. The specific method is as follows:

In the case of serious build-up and excessively thick sclerotinous culture materials, a layer of senescent bacilli can be scraped off in a comprehensive and thin manner. For the slightly thickened sclerotin and sclerotinous cultivating material surface, many longitudinal grooves can be drawn with wire. Until the inside of the exposed mycelium; boring bed cultivation, can use a bamboo broom to sweep back and forth on the bed, until the old mycelium scrape to reveal the mycelium inside; bag planted, both ends of the old mycelium scraped off.

The scraping bacteria have obvious stimulatory effects on the primordial differentiation, which can promote the growth of mycelia. Generally, 10 days later, new mushroom buds emerge. However, it should be noted that the scraped old fungus and mycelium should be removed after scraping the surface to prevent contamination by bacteria. At the same time, the exposed new material should be flat so as to facilitate neat mushrooming. In addition, water should not be sprayed until the mycelium resumes growth.

Piston Rod

it is full range of piston rod for the following type :

Piston Rod,Piston Rod Parts,Hydraulic Cylinder Piston Rod,Automobile Cylinder Piston Rod Parts

ZhouShan HeCheng Machinery Co., LTD. , https://www.hcmarineparts.com