1. Adjustment of the bracket The screw automatic packaging machine is spirally hung on the adjusting shaft. The structure is similar to the hanging bulb. Each rotating screw 900 sets the cup on the spiral to observe the gap between the cup opening and the bracket. If the gap is inconsistent, adjust the bracket. First loosen the bracket bolts (do not loosen completely, use a wooden stick to knock the bracket), use a wooden stick to hit the position where the bracket gap is large, and the sleeve can be smoothly put on when the screw is turned to any position. The position has been adjusted to tighten the bracket bolts.
2, the adjustment of the screw height The screw automatic packaging machine cup is placed on the spiral to observe the position of the bottom of the spiral, the bottom of which is about 2 mm from the inner edge of the bottom of the cup. When adjusting, open the observation window on the right side of the hopper cover, loosen the adjusting shaft screw, fix the cup evenly with three cup screws, hold the adjusting shaft up and down by hand, and tighten the adjusting shaft screw when the screw height is appropriate.
4. Adjustment of photoelectric switch The sensitivity of the photoelectric switch has been adjusted at the factory, and it can be adjusted if it feels inappropriate. Press the [Set] button on the keyboard to display bSZ in the left window. Use a screwdriver to rotate the screw at the rear end of the photoelectric switch. At the same time, block the photoelectric switch by hand. At this time, the red light will be on until the distance is right. Press [Exit] to Working status.
Screw automatic packaging machine picture:
best selling:
Food automatic packaging machine [recommended] drug automatic packaging machine [recommended] granule automatic packaging machine [recommended] pillow type automatic packaging machine [recommended] moon cake automatic packaging machine [recommended] candy automatic packaging machine [recommended] biscuits Automatic packaging machine [recommended]
Laser Pain Relief Machine
The Laser Pain Relief Machine consists of mainframe, probe, power line and goggles. The probe, cover, buttons, probe wire, external connectors and so on are all made from medical insulation rubber, non-toxic and no side effects ABS plastic. The protective probe mat and bandage contact with the human body directly, less than 30 minutes. It is a kind of short-time contact .The protective probe mat and bandage have passed biological compatibility test thus they are harmless to the human body. The protective goggles are provided to avoid laser irradiating into eyes, reducing the risk of eyes damage.
Laser Pain Relief Machine Features
1. Natural & drug free
2. Non-invasive
3. Highly effective
4. Non-side -effects.
Laser Pain Relief Machine Effects:
â— Increase production of ATP (Adenosine Triphosphate).
â— Increase cellular metabolism.
â— Increase collagen production.
â— Increase enzyme production.
â— Increase e synthesis
â— Better blood flow.
â— Better lymphatic flow and drainage.
â— Eliminate inflammation.
Applications:
1. Pain clinic, such as soft tissue injury, heel pain, acute lumbar muscle sprain, scapulohumeral periarthritis, stiff neck, tennis elbow, cervical spondylosis, knee-joint disease of old-people, rheumatoid arthritis, neuropathic pain, wound healing, local infection, chronic pharyngitis, etc.
2. Women's Problems, such as pelvic inflammation, annexitis, dysmenorrhea, Inflammation of the vagina itch, mammitis, wound healing, etc (Note: hospital Laser Pain-Relief Instrument are more convenient for private place).
3. Skin disease, such as allergic dermatitis, thromboangiitis obliterans, 15 neurodermatitis, Herpes zoster and after herpes zoster pain, erysipelas, bedsore, eczema, cutaneous pruritus, etc.
4. Dermatology, such as swollen, cold injury, scald, acne, alopecia areata, alopecia, skin transplantation, etc.
Low Level Laser Therapy,Laser Pain Relief Machin,Acupoint Laser Therapy,Pain Relief Machine
Shenzhen Guangyang Zhongkang Technology Co., Ltd. , https://www.szlighttherapymachine.com