What should I pay attention to when using the belt conveyor?

In the working process of mesh belt conveyors, many components are not safe to use and are prone to accidents. In order to avoid accidents, special attention should be paid to the following problems during use: conveyor belts must have sufficient strength. Strength conveyor belt instead of high strength conveyor belt.

Tensioning device: The tensioning device should be equipped with a limit limiter. When the automatic tensioning device is raised to the extreme position, the power supply must be automatically cut off and the rising signal is prohibited. When it is lowered to the extreme position, it guarantees that the power supply is automatically cut off. Send a stop signal.

The weight tightening equipment should be installed where the personnel are normally closed. The guard should prevent people from entering the space below the weight. Without such protection, the weight should be installed under the support to keep it away from the ground or other surfaces. The gap distance is not less than 2.5 meters.

Braking device: The braking device must be in a state where it can be braked at any time. The friction surface of the brake should not have any defects or oil traces. Normal and emergency braking devices should be highlighted and placed in a convenient position. Unloading system The moving device should be sensitive and reliable. The limiting device should be able to withstand the maximum wind force without being blown by the wind. The end of the track should ensure that the unloading truck does not derail and does not roll over.