For corn to achieve super high yield, fertility is the key. Application of 3-5-square-fertilizer, manure and other organic fertilizers per acre can increase soil organic matter, improve production conditions, fertilize fertility, and improve land quality. Rigid planting plants for deep loosening and root-stimulating should be deep-sown in time after the harvest of the previous crop, with a depth of 30-35 cm. After loosening, it is used to smash, squeak and smash. The soil temperature during sowing was low, 30 cm of ridges were planted before sowing, and the ground temperature was increased to achieve Miao Qi Miao Zhuang.
Seeds planted at the right time to achieve super high-yielding constituency varieties for the dense varieties, such as Zhengdan 958, Xianyu 335 and other tightness varieties. Artificially selected seeds before sowing were used to remove crushing particles, insect-eaten grains, and diseased spots to ensure seed germination and purity. Corn seed coating agent can be seeded by 1.5% of seed amount before sowing. The best sowing date for the northeast spring maize area is from April 20 to May 10. If sowing is too early, it can easily cause low-temperature, rotten seed, and the emergence of seedlings is not uniform. If sowing is too late, it will affect corn growth and late dehydration. Sowing depth should be determined according to soil moisture conditions and temperature conditions in spring. Suitable sowing depth is 3 to 5 cm. Sowing when sowing increased by 10%, the general sowing volume of 4 kg, ultra-high yield fields can be increased to 5 kg, 5 leaf period to pull weak seedlings, leaving strong seedlings to ensure uniform seedlings, seedling strong, Miao Qi.
To increase the density and construct a high-yield population To achieve a super-high yield level of more than 1000 kg per mu, it must be suitable for dense planting, increase the density to more than 5000 plants/mu, and determine the appropriate density of seedlings according to the variety characteristics and soil fertility levels. Zhengdan 958 must have more than 6,500 trees per acre and no less than 6,000 actual harvests. Xianyu 335 has 6000 seedlings per mu, and the actual income is not less than 5,500. The planting method is 60 cm spacing and 18.5-20 cm spacing.
The production and test results of chemically regulated shrinkage strong stalks lodging resistance and test results show that the general corn cultivar density is more than 4,500 strains/mu when prone to field lodging. Applying chemical control technology, spraying 300ppm of Jindele or Zhuangfengling corn regulator at the jointing stage of corn leaves, can reduce corn vegetative, stalk fineness, resistance to lodging, and does not change corn ear characteristics, construction The purpose of a high-yield group.
High-yield, high-yield, high-yield, high-yield, high-yield farms Each production of 100 kg of grain requires 3 kg of pure nitrogen, 1 kg of phosphorus, and 2 kg of potassium. The high-yield spring maize field requires 50 kg of N fertilizer (urea), 50 kg of P fertilizer (superphosphate), and 25 kg of potash (potassium sulfate). For zinc-deficient land, 1 kg of zinc sulfate should be applied per mu. In fertilizer management, light Miaofei, heavy panicle fertilizer, make up for flowering grain fertilizer. Maturation fertilizer before the jointing of the corn will be about 30% of the total amount of nitrogen fertilizer plus all phosphorus, potassium, zinc fertilizer, along the side of the seedlings deep ditch (15 ~ 20 cm), in order to root strong seedlings. Panicle fertilizer in the corn big bell-mouth period (the 11th to 12th leaves are unfolded) is about 50% of the total nitrogen applied, so that there are more panicles and spikelets. Flower bud fertilizer applied 15%-20% of total nitrogen in grain filling stage to increase the photosynthetic capacity and increase grain weight.
Disease prevention and pest control production increase corn disease, pests, disease prevention and control one by selecting resistant varieties to control, such as the size of leaf spot, stalk rot, etc.; second is to adjust the sowing date, reduce the damage of the planthopper, prevent rough shrinkage disease. Underground pests are controlled by seed coating agents or seed dressings, and corn borers are controlled by organophosphorus pesticides during the big bell mouth period.
The seed of live seedlings was increased in direct seeding and produced in real time. The depth of seeding was 3 to 5 cm, and the depth was the same to ensure Miao Qi, Miao Quan, and Miao Dian. When the corn glutinous leaves in the field turn white and yellow, the grains have not been grouted, and they are late harvested. After delaying until the disappearance of the corn grain milk line, the appearance of the black layer, and the dryness of the temporal lobe, it is fully mature and then harvested. Heavy, increase production.
Seeds planted at the right time to achieve super high-yielding constituency varieties for the dense varieties, such as Zhengdan 958, Xianyu 335 and other tightness varieties. Artificially selected seeds before sowing were used to remove crushing particles, insect-eaten grains, and diseased spots to ensure seed germination and purity. Corn seed coating agent can be seeded by 1.5% of seed amount before sowing. The best sowing date for the northeast spring maize area is from April 20 to May 10. If sowing is too early, it can easily cause low-temperature, rotten seed, and the emergence of seedlings is not uniform. If sowing is too late, it will affect corn growth and late dehydration. Sowing depth should be determined according to soil moisture conditions and temperature conditions in spring. Suitable sowing depth is 3 to 5 cm. Sowing when sowing increased by 10%, the general sowing volume of 4 kg, ultra-high yield fields can be increased to 5 kg, 5 leaf period to pull weak seedlings, leaving strong seedlings to ensure uniform seedlings, seedling strong, Miao Qi.
To increase the density and construct a high-yield population To achieve a super-high yield level of more than 1000 kg per mu, it must be suitable for dense planting, increase the density to more than 5000 plants/mu, and determine the appropriate density of seedlings according to the variety characteristics and soil fertility levels. Zhengdan 958 must have more than 6,500 trees per acre and no less than 6,000 actual harvests. Xianyu 335 has 6000 seedlings per mu, and the actual income is not less than 5,500. The planting method is 60 cm spacing and 18.5-20 cm spacing.
The production and test results of chemically regulated shrinkage strong stalks lodging resistance and test results show that the general corn cultivar density is more than 4,500 strains/mu when prone to field lodging. Applying chemical control technology, spraying 300ppm of Jindele or Zhuangfengling corn regulator at the jointing stage of corn leaves, can reduce corn vegetative, stalk fineness, resistance to lodging, and does not change corn ear characteristics, construction The purpose of a high-yield group.
High-yield, high-yield, high-yield, high-yield, high-yield farms Each production of 100 kg of grain requires 3 kg of pure nitrogen, 1 kg of phosphorus, and 2 kg of potassium. The high-yield spring maize field requires 50 kg of N fertilizer (urea), 50 kg of P fertilizer (superphosphate), and 25 kg of potash (potassium sulfate). For zinc-deficient land, 1 kg of zinc sulfate should be applied per mu. In fertilizer management, light Miaofei, heavy panicle fertilizer, make up for flowering grain fertilizer. Maturation fertilizer before the jointing of the corn will be about 30% of the total amount of nitrogen fertilizer plus all phosphorus, potassium, zinc fertilizer, along the side of the seedlings deep ditch (15 ~ 20 cm), in order to root strong seedlings. Panicle fertilizer in the corn big bell-mouth period (the 11th to 12th leaves are unfolded) is about 50% of the total nitrogen applied, so that there are more panicles and spikelets. Flower bud fertilizer applied 15%-20% of total nitrogen in grain filling stage to increase the photosynthetic capacity and increase grain weight.
Disease prevention and pest control production increase corn disease, pests, disease prevention and control one by selecting resistant varieties to control, such as the size of leaf spot, stalk rot, etc.; second is to adjust the sowing date, reduce the damage of the planthopper, prevent rough shrinkage disease. Underground pests are controlled by seed coating agents or seed dressings, and corn borers are controlled by organophosphorus pesticides during the big bell mouth period.
The seed of live seedlings was increased in direct seeding and produced in real time. The depth of seeding was 3 to 5 cm, and the depth was the same to ensure Miao Qi, Miao Quan, and Miao Dian. When the corn glutinous leaves in the field turn white and yellow, the grains have not been grouted, and they are late harvested. After delaying until the disappearance of the corn grain milk line, the appearance of the black layer, and the dryness of the temporal lobe, it is fully mature and then harvested. Heavy, increase production.
Roasted Sunflower Seeds,Roast Sunflower Seed,Honey Roasted Sunflower Seeds,Honey Roasted Sunflower Kernels
Inner Mongolia Xuanda Food Co., Ltd. , https://www.xuandagroup.com