Do you know about the automatic big honey ball wax machine?

After the operator stops working on the day of work, the wax liquid in the wax tank should be drained clean, and the cleaning equipment should splash the wax and stain on the body during the day's work. If there is an abnormality in the working day, it needs to be recorded in detail by the staff, placed at the point of waking up or directly delivered to the next staff member, so as to reduce the unnecessary accidents in the work and deepen the situation. All staff members have an understanding of the equipment used and are easy to operate. When the personnel is off the aircraft, the water source, air source and power supply must be cut off to prevent accidents such as mishandling and other accidents.

Weekly maintenance and maintenance: The equipment is maintained once a week.

The working method is as follows:
1 Check the wearing parts of the consumables and replace them immediately if they are worn out.
2 Fasten the screws that support the bottom of the wax guide body with tools to prevent looseness and affect normal production.
3 Adjust the angle of the bucking needle so that the center is in the same plane as the shot pin and the shot puncture shaft to ensure the continuity of the pill and the sustainability of production, and improve the production efficiency.

4 Remove the wax deposits inside and outside the machine due to prolonged work splashing in an inconspicuous position, keeping the equipment clean and the hygiene of the medicine.

The equipment should be refueled before driving. Where there is a reciprocating motion----such as reciprocating shaft, lifting shaft, and carriage, etc., oil should be added twice a day, and the cam groove is greased once a month.

The structural characteristics of the equipment are as follows:

1. In the production process of continuous waxing, the surface of the wax shell can be ensured to be smooth and have a good sealing effect. The wax layer of the finished wax shell after waxing is uniform in thickness and beautiful in appearance. The production capacity and the finished product rate are superior to the traditional manual waxing, which can win the recognition of the majority of users.

2. This machine can easily adjust the water temperature and wax temperature instability caused by the external environment during the production process. At the same time, after replacing the accessories, it can adapt to the waxing process of 3g, 6g and 9g Dami Pills. . If there are special types of products, the required accessories can be customized according to the needs of users.

3, the fuselage uses a beautiful circular structure. The floor space is moderate and the space is fully utilized.

Well, the above is the introduction of some relevant knowledge about the automatic big honey poke wax machine . I hope that it will be helpful for everyone to use this equipment in the future.