Sweet corn high-yield planting tips

Isolation planting. In order to prevent crossbreeding with other corn varieties, reduce sweetness and affect quality, sweet corn must be isolated and planted. The isolation zone is required to be more than 400 meters, and the time difference isolation can also be adopted. The flowering period is required to differ by more than one month.

Fine seedlings. The sweet corn seeds are dry, the ability to germinate the top soil is poor, the germination rate is low, the seedlings grow weak, and the soil requirements are high. Generally, it should be deep-turned, flattened and shredded to make the soil loose and well-loved, creating a suitable soil environment for seed germination and seedling growth. Seeds should be selected to remove insect seeds, bad seeds, and mold seeds. The soil moisture should be suitable when planting, the sowing should not be too deep, cover the soil about five centimeters, and at the same time ensure that the soil cover is consistent, and strive to be full seedlings. Apply enough base fertilizer between the holes, and dilute 5-10 kg of liquid seed dressing with new high-fat membrane mother liquor to repel subterranean pests and isolate virus infection.

Field management. Under the condition of general soil fertility level, phosphorus and potassium fertilizers are applied as base fertilizers at one time. Water management should pay attention to flood control during the seedling period and drought prevention in the middle and late period. Due to the slow growth of sweet corn, the seedling stage is prone to grass shortage, and must be ploughed as soon as possible to remove weeds. From the jointing to the big bell mouth, timely control of corn mash, the use of low-toxic pesticides, spray with new high-fat film, can reduce pesticide toxins, while increasing drug efficiency. Penetration of roots promotes growth, increases yield, and increases sweetness

Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone

Medical Isolation Shoe Covers

The medical protective shoe cover includes a coat, an inner bladder, a strap, a velcro surface, a non-slip bottom, and a velcro female surface. There is a sock-shaped inner liner that can be removed, and the anti-slip bottom is preferably provided with an anti-slip corrugated beef tendon bottom on the bottom surface; one side of the end of the strap is provided with a hook-and-loop fastener surface, and the other side is provided with a hook-and-loop fastener surface matching the hook and loop surface; the jacket Waterproof material is preferred, and elastic fabric is preferred for the inner liner; the jacket of the utility model is made of waterproof plastic material, and the anti-slip bottom surface adopts beef tendon bottom, which is strong and durable; The utility model can be reused after cleaning and disinfection, and can be used continuously after the inner tank is cleaned and disinfected; the arrangement of the straps enables the utility model to have the protection performance exceeding that of high-top shoe covers, but it is as convenient to wear as low-top shoe covers. Scope of application: used by medical personnel in medical institutions to prevent contact with potentially infectious patients' blood and body fluids, and play a barrier and protection role Instructions: Before use, unfold the isolation shoe cover, put on the shoe cover, put the socks and trousers into the isolation shoe cover, and fix it with straps. Through the actual operation of many people, it has been verified that Dongbei disposable non-woven isolation shoe covers are wear-resistant, waterproof, breathable, good isolation, and high-tube shoe covers do not slide down in one-time use. Features The product uses non-woven fabric or polyethylene film as the main raw material, which is cut, sewn into or thermosynthesized. Sufficient strength and barrier properties, provided non-sterile Product Description; This product is made of plastic film or non-woven fabric and rubber band by hot pressing. The biggest feature is that it is easy to use, and has a wide range of applications. Different materials have different corresponding functions, such as anti-skid, anti-static and dust-proof. Moreover, the price is much cheaper than the non-disposable shoe covers, and the handling is also convenient, especially the non-woven shoe covers, which can be naturally degraded. Scope of application: It is generally used by medical staff, hygienic, clean places, and laboratories. [Precautions] 1) This product is for one-time use only and will be destroyed after use. 2) This product should be stored in a well-ventilated and clean environment away from fire sources, with a relative humidity of not more than 80%, no corrosive gas, and good ventilation.

Medical Isolation Shoe Covers,Isolation Shoe Boot Covers,Non Slip Shoe Boot Cover,Medical Isolation Shoe Boot Covers

Jilin Sinoscience Technology Co. LTD , https://www.contoryinstruments.com