How to replace the ribbon cassette of the wireless electronic crane scale?
Usually, there is a ribbon box inside the electronic crane scale . In fact, this ribbon cartridge is the printer box, which is to help you handle the conversion of this data. Once used for a long time, it will definitely appear old and must be replaced regularly. How do you replace the ribbon cartridge of the electronic hanging?
First, when replacing the ribbon cassette of the electronic crane scale , first open the cover of the printer, then remove the old ribbon before, and do not damage the gear shaft. Then put the new ribbon cassette gently on the gear shaft at the left end of the machine head. Note that this point must be controlled at the left and right ends. Otherwise, if the position is unstable, it will affect the ribbon. Straighten.
In fact, such replacement steps are relatively simple, but the premise is that when you take this electronic crane down, you must pay attention to the fact that the electronic hanging name cannot be in working condition. Zui is good to take it off at rest, in order to ensure the integrity of the entire component. When replacing later, you should also pay attention to the fact that the ribbon cassette of the hook scale must be straightened. If it is not straightened, it will not work properly. It will also cause the printer to not work properly. The data printed after the Zui is not clear. And so on.
Double Sided Nano Tape,Nano Double Sided Tape,Double Sided Magic Tape,Reusable Double Sided Tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.yuhuanptapes.com