The reactor body and the reaction kettle lid of the high-pressure magnetic reaction kettle are sealed by a tapered surface and a circular arc surface line, and the main bolts are tightened to make a good seal to each other, and the tightening torque must not be exceeded when the main bolt is tightened. 80-120NM range, in order to prevent the sealing surface from being squeezed and overloaded, the sealing surface should be specially protected. When the reactor lid is installed, the reactor lid should be slowly started up and down to prevent the reactor body and the reaction kettle. The sealing faces between the covers collide with each other. To tighten the main nut, it must be symmetrical and stepwise to tighten the force gradually, and the force should be even, to achieve a good sealing effect.
The main part of the autoclave - the lid (the lathe processing after the whole forging flaw detection), the kettle body (the lathe is hollow after the whole forging flaw detection), the strong magnetic coupling stirrer, the high temperature and high pressure needle valve, the lower agitating part, the internal cooling The materials used for the coil, the temperature measuring part, and the submerged tube are selected from 0Cr18Ni9 (304), 0Cr18Ni10Ti (321), 00Cr17Ni14Mo2 (316L), titanium, Hastelloy, Monel, nickel, zirconium, coffin, 904L, Made of silver or PTFE, it can also be built with titanium/Halst/Monel/nickel/zirconium/coffin/silver/tetrafluorocarbon, and can be sprayed with high temperature PTFE layer.
The core part is a (ring) strong magnetic coupling stirrer, a plurality of magnetic steel rings are made of two strong permanent magnets inside and outside; the inner magnetic steel body is sealed in a sealed cylinder made of stainless steel to connect the stirring part, the sealing cylinder and the kettle The cover, the kettle body and the fastening joint form a static sealing cavity, so that the reaction medium is completely in a static sealing state without any leakage, pollution and personal danger; the speed regulating motor drives the external magnetic steel body, and the strong magnetic force is made through stainless steel without contact. The sealed cylinder body is attracted to the strong magnetic force of the inner magnetic steel body sealed in the sealing cylinder body, and is mutually positioned to act on the axial rotating traction, and the high temperature and high pressure stirring reaction is performed.
With static sealing, no leakage, no noise, no pollution, stable operation, simple operation, sturdy and durable, and compact structure, it can be used in high temperature, high pressure, high vacuum, high speed, solid-liquid suspension and convection. The reaction medium is completely in a static sealed state, and it is safe to carry out high-efficiency reaction of flammable, explosive, highly toxic, harsh medium such as hydrogen, hydrofluoric acid and hydrogen sulfide.
The unique self-lubricating bushing is resistant to high temperature and pressure, corrosion and abrasion, avoiding secondary pollution and ensuring material purity. It is suitable for gas/liquid/solid mixing, suspension, convection, large viscosity materials and high-speed stirring reaction. All sealing parts are line-sealed, so there is no leakage problem in the whole equipment. There are two kinds of upper and lower discharge methods, which shortens the mixing time and strengthens the reaction process. It is the first choice for developing test products.
Weihai Borui Chemical Machinery Co., Ltd. produces all kinds of autoclaves, and the autoclave produced has safety and reliability.
In the production of autoclaves, if you encounter high-volatility, flammable and explosive substances in the autoclave, you need a vacuum-tight system that is insulated from oxygen. A nitrogen-replacement device is required. It is necessary to prevent over-temperature cooling circulating water, gas concentration alarm, and adsorption. Or cooling exhaust public utilities system, such as firewalls, operating room shutters, operating rooms, other devices, workshop safety distances, etc., need to have a safety interlock device that cuts off the material conveying system in case of danger. There are safety valves, rupture discs, flame arresters and leaking gas condensation collectors and leakage liquid collection tanks when overpressure and over temperature, employee gas mask protective clothing, fire protection appliances, etc. There must also be a central control and command system that takes measures of isolation, evacuation, and transfer in a timely manner in the event of a dangerous situation.
The autoclave belongs to the high-pressure and high-temperature products, so the safety protection should be put in the first place. As a company, it must have a good awareness, and the staff must be strictly on-the-job training. In order to avoid loss caused by improper operation.
The main part of the autoclave - the lid (the lathe processing after the whole forging flaw detection), the kettle body (the lathe is hollow after the whole forging flaw detection), the strong magnetic coupling stirrer, the high temperature and high pressure needle valve, the lower agitating part, the internal cooling The materials used for the coil, the temperature measuring part, and the submerged tube are selected from 0Cr18Ni9 (304), 0Cr18Ni10Ti (321), 00Cr17Ni14Mo2 (316L), titanium, Hastelloy, Monel, nickel, zirconium, coffin, 904L, Made of silver or PTFE, it can also be built with titanium/Halst/Monel/nickel/zirconium/coffin/silver/tetrafluorocarbon, and can be sprayed with high temperature PTFE layer.
The core part is a (ring) strong magnetic coupling stirrer, a plurality of magnetic steel rings are made of two strong permanent magnets inside and outside; the inner magnetic steel body is sealed in a sealed cylinder made of stainless steel to connect the stirring part, the sealing cylinder and the kettle The cover, the kettle body and the fastening joint form a static sealing cavity, so that the reaction medium is completely in a static sealing state without any leakage, pollution and personal danger; the speed regulating motor drives the external magnetic steel body, and the strong magnetic force is made through stainless steel without contact. The sealed cylinder body is attracted to the strong magnetic force of the inner magnetic steel body sealed in the sealing cylinder body, and is mutually positioned to act on the axial rotating traction, and the high temperature and high pressure stirring reaction is performed.
With static sealing, no leakage, no noise, no pollution, stable operation, simple operation, sturdy and durable, and compact structure, it can be used in high temperature, high pressure, high vacuum, high speed, solid-liquid suspension and convection. The reaction medium is completely in a static sealed state, and it is safe to carry out high-efficiency reaction of flammable, explosive, highly toxic, harsh medium such as hydrogen, hydrofluoric acid and hydrogen sulfide.
The unique self-lubricating bushing is resistant to high temperature and pressure, corrosion and abrasion, avoiding secondary pollution and ensuring material purity. It is suitable for gas/liquid/solid mixing, suspension, convection, large viscosity materials and high-speed stirring reaction. All sealing parts are line-sealed, so there is no leakage problem in the whole equipment. There are two kinds of upper and lower discharge methods, which shortens the mixing time and strengthens the reaction process. It is the first choice for developing test products.
Weihai Borui Chemical Machinery Co., Ltd. produces all kinds of autoclaves, and the autoclave produced has safety and reliability.
In the production of autoclaves, if you encounter high-volatility, flammable and explosive substances in the autoclave, you need a vacuum-tight system that is insulated from oxygen. A nitrogen-replacement device is required. It is necessary to prevent over-temperature cooling circulating water, gas concentration alarm, and adsorption. Or cooling exhaust public utilities system, such as firewalls, operating room shutters, operating rooms, other devices, workshop safety distances, etc., need to have a safety interlock device that cuts off the material conveying system in case of danger. There are safety valves, rupture discs, flame arresters and leaking gas condensation collectors and leakage liquid collection tanks when overpressure and over temperature, employee gas mask protective clothing, fire protection appliances, etc. There must also be a central control and command system that takes measures of isolation, evacuation, and transfer in a timely manner in the event of a dangerous situation.
The autoclave belongs to the high-pressure and high-temperature products, so the safety protection should be put in the first place. As a company, it must have a good awareness, and the staff must be strictly on-the-job training. In order to avoid loss caused by improper operation.
Deposit Safe,Hotel Deposit Box,Hotel Deposit Safe,Hotel Cash Night Deposit Safe
Hebei Hupai Aodi Cabinet Industry Co.,Ltd. , https://www.hupaiaodi.com